1. Introduction | 4. A Look at the Case |
2. Tech Specs | 5. What This Case Brings khổng lồ the Table |
3. Packaging/Boxing | 6. Final Thoughts và Our Rating |
Cooler Master MasterBox Lite 3.1:A Budget-Friendly mATX Case
If you’re looking for a budget-friendly micro-ATX or mini-ITX case, you might want to kiểm tra out the Cooler Master MasterBox Lite 3.1.Bạn đang xem: Amazon
It isn’t quite as cheap as some of the ultra budget-friendly cases out there, but it does have a few more features, as well as more room, and, in my opinion, a better thiết kế than some of its competitors.
The case comes with a large transparent side window & the ability lớn fit the longest và tallest graphics cards và heatsinks on the market.
So, if you want khổng lồ build a high-end system inside of this case (or work your way up lớn one through upgrades) you can definitely bởi so.
Overall, I would say that this is probably a case that would work well for someone who has a budget of about ~$500 or more khổng lồ build their computer with. Of course, choosing a case is different for every individual, as a lot of your choice comes down to lớn aesthetics.
In my opinion, the MasterBox Lite 3.1 is a nice looking case và if you think so as well by looking at the pictures, be sure to read the rest of this đánh giá (or just check it out on Amazon) khổng lồ get a better idea of what you can expect out of it.
Check Price
Cooler Master MasterBox Lite 3.1 Tech Specs
Motherboard | micro-ATX, mini-ITX |
USB 3.0 | Yes |
VGA | Max ~380mm |
Heatsink | Max ~158mm |
PSU Mount | Bottom |
Build Material | Steel, Plastic |
Dimensions | 456mm x 208mm x 381mm |
Weight | ~8.7 LBS. |
MasterBox Lite 3.1 Packaging
The MasterBox Lite 3.1 comes in a standard box. There’s not flashy design, just an outline sketch of the case, a brief mô tả tìm kiếm of what it offers on the back of the box, và the general tech specs on the side of the case.
The box does have handles on the sides which does make it a bit easier transporting it lớn wherever it is you are going to open it. This is pretty much standard with all case boxes these days, but still nice to lớn have nonetheless.
I didn’t take any pictures of the đứng top of the box mở cửa to show what the tư vấn material on the inside is lượt thích (you can check the video up đứng đầu to see me unbox it), but there are two styrofoam supports formed to fit the case on both sides, which makes it fit snug in the box.
And, the case itself is covered in a plastic covering for further protection.
All of the hardware, screws, và accessories that come with the case are located inside of it.
Ultimately, if you love when your products come in fancy packaging, you probably won’t be wowed with what Cooler Master has done here.
But if you’re like me, you don’t really care about that kind of stuff (especially if the price of the packaging gets priced into the cost of the product), & the bare minimum in packaging that will keep the hàng hóa safe while it is being delivered to lớn you is more than enough.
A Look at the MasterBox Lite 3.1
The thing I love about the design & look of the MasterBox Lite 3.1 is that, for starters, it doesn’t try to dotoo much. It’s got a nice sleek design, with just a little bit of accent color (red, white, and black available.)
And, rather than making you choose the màu sắc scheme of the case at the time of purchase, Cooler Master throws in all three of the available trim colors. So, depending on your mood (or the màu sắc scheme of your build), you can change the accent colors to lớn your liking.
The transparent windows is also a nice feature for a budget-friendly case. And, this isn’t just a small little window that you can catch a glimpse through…
The entire side panel is a transparent window. So, if you don’t want anyone to lớn know how lousy your cable management is, this probably isn’t the case for you. But, if you are meticulous with your cable management, this is the perfect case khổng lồ show off your skills.
Despite the MasterBox Lite 3.1 being a smaller form-factor case, there is actually quite a lot of room on the inside of it. This is mostly thanks khổng lồ the move away from drive bays for optical drives.
Xem thêm: New Phim Âm Mưu Và Tình Yêu Trọn Bộ Phần 1 081, Phim Âm Mưu Và Tình Yêu
However, the case is fairly deep for a mATX case. It’s deep enough khổng lồ fit even the tallest CPU heatsinks out there (like the Cooler Master Hyper 212 EVO).
The all-black finish on the inside of the Lite 3.1 brings the aesthetics together and really gives you the ability khổng lồ build a nice-looking system inside of this case.
In the end, in terms of aesthetic and design, there is a lot to lượt thích here for such an affordable case.
What the MasterBox Lite 3.1 Brings khổng lồ the Table
There is a lot to lượt thích about the MasterBox Lite 3.1. It’s a very affordable case (priced at about ~$40) that has a ton of room inside of it.It can fit GPUs as long as 380mm and heatsinks/CPU coolers as tall as 158mm. Or, in other words, it can fit just about any graphics card & heatsink inside of it.
That means you can build just about as powerful of a single-GPU system as possible inside of this case.
So, for performance purposes, this case will not hinder your ability lớn fit a high-end system inside of it.
You can use either a micro-ATX or a mini-ITX motherboard inside of it. It’s dimensions are 456mm x 208mm x 381mm. And, the case weighs approximately ~9 pounds. With a full system inside of it, it would come in at well under 15 pounds, which makes it plenty light enough to lớn use as a LAN case.
The case also supports up lớn four fans (it only comes with one installed) & has space for a liquid cooling radiator on the front of the case (240mm) & the back of the case (120mm).
Also, another nice feature that smaller budget-friendly cases don’t often come with is that the PSU is mounted on the bottom, rather than the top. This is a plus because bottom-mounted PSUs are ideal for cooling purposes.
Overall, for the price, this is a feature-rich case that has plenty of room for just about any type of build you might want lớn do. It’s not a high-end case by any means, but it will be more than enough for most user’s needs.
Our Final Thoughts:A Solid mATX Case That Won’t Break the Bank
I’ll start by saying that thereare some trade-offs with the MasterBox Lite 3.1. On the one hand, the Lite 3.1 is a budget-friendly small form-factor case.
On the other hand, if you are looking to lớn use a standard ATX motherboard, you won’t be able to fit one inside of the Lite 3.1.
At just over $40 on Amazon, though, the MasterBox Lite 3.1 is a phenomenal value considering what you get for the price.
The Lite 3.1 has a lot more wow-factor going for it than some of the competitors in this price range. And, it can essentially hold as powerful of a single-GPU system as you can possibly build.
This is because it has plenty of space for even the biggest graphics cards on the market & it can fit the tallest heatsinks as well.
Overall, if you’re looking lớn build a budget-friendly gaming PC & you want to lớn keep your system in a smaller case, the MasterBox Lite 3.1 is a really solid case và it is one that you should probably at leastconsider.